COMPANY HEADER
Print Back
Lubrication of O-ring seals is extremely important for installation and operation of dynamic seals as well as proper seating of static seals. The general rule for use of lubrication is: The greatest benefit in using a lubricant is obtained during the initial installation of the O-ring.

Parker Seal offers two lubricants that will satisfy most service needs: Parker O-Lube and Parker Super-O-Lube. These two lubricants are described in the following paragraphs. Table 3-1 lists their key properties along with others used in specific types of services. Table 3-2 provides part number information for O-Lube and Super O-Lube.
Parker O-Ring Lubricants
Unit of Measure
1 

Item #

Item Name

Tube Size

Type of Elastomer

Operating Temperature Range

OLUBE .25OZ N/A OLUBE .25OZ - Parker O-Ring Lubricating Grease N/A 1/4 oz N/A Chloroprene Rubber (CR) Neoprene Nitrile Nitrile Butadiene Rubber (NBR) N/A -29 to 82 ºC-20 to 180 ºF
OLUBE 884-4 N/A OLUBE 884-4 - Parker O-Ring Lubricating Grease N/A 4 oz N/A Chloroprene Rubber (CR) Neoprene Nitrile Nitrile Butadiene Rubber (NBR) N/A -29 to 82 ºC-20 to 180 ºF
Unit of Measure
1